Running preloaded program from flash on Ubuntu 20.04 via VirtualBox

Jack
Posts: 14
Joined: Tue May 19, 2020 10:03 am

I'm having exactly the same issue, and I tried lsusb command in ubuntu 20.04 running on VM. Got below msg.

jzhang@ubuntu:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. VMware Virtual USB Mouse
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


The USB port doesn't come to VM.
phil_quik
Posts: 14
Joined: Mon May 18, 2020 12:33 am

I am using WIN10 running vmware.
In Windows, i can see VMware USB device has been recognized by Windows.
But cannot detect by Ubuntu in VM.

I also tried ubuntu20.04 in virtualbox. USB extention pack has been installed and it can recognized Merced board as well.
Still cannot make it work for QuickFeather.

I am wondering do I need to install driver for Win10 first?
Although in Windows, I already can use Putty to control the board.
anthony-ql
Posts: 8
Joined: Thu Jun 04, 2020 1:26 am

So far, on Win10 with VirtualBox or VMware, there is no solution for the QF, yet. Other people has reported success with running Ubuntu 18.04 WSL.
phil_quik
Posts: 14
Joined: Mon May 18, 2020 12:33 am

Okay. I just found that I can use Windows to program the image and also use JLINK to recover the board.
anthony-ql
Posts: 8
Joined: Thu Jun 04, 2020 1:26 am

The QuickFeather recovery procedure is tested with Win10 + Jlink and Native Ubuntu 18.04 + Jlink.
Post Reply