Installation on the Red Hat Enterprise Linux Server release 7.7
Posted: Tue May 19, 2020 3:03 pm
Hi Team,
Let me clarify on the installation process on the Red Hat Enterprise Linux Server release 7.7.
Here is my installation setting followed the "Symbiflow Installation Guide and Tutorial."
1. >chmod 755 ./Symbiflow-Linux-7-3_05_15_2020.gz.run
2. >export SYM_INSTALL_PATH=/home/username/Tool/
3. >./Symbiflow-Linux-7-3_05_15_2020.gz.run
4. >cd /home/username/Tool/symbiflow-arch-defs/install/bin
5. >source ql_env
6. >cd /home/username/Work
7. >ql_symbiflow -h
---
[username@machinename Work]$ ql_symbiflow -h
Below are the supported commands:
To synthesize and dump a eblif file:
>ql_symbiflow -synth -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To run synthesis, pack, place and route, generate bitstream:
>ql_symbiflow -compile -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To generate the jlink file:
>ql_symbiflow -jlink -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To generate the post verilog file:
>ql_symbiflow -post_verilog -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file >
To generate the ascii header file from bitstream:
>ql_symbiflow -bit2header -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To generate the ascii header file from jlink:
>ql_symbiflow -jlink2header -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file >
Device supported:ql-eos-s3
Packages supported PD64,PU64,WR42
-h
/home/username/Tool/symbiflow-arch-defs/install/bin/ql_symbiflow: line 224: /v_list: Permission denied
---
Is this correct? or need any correction on installation?
thanks for your advise!!
Let me clarify on the installation process on the Red Hat Enterprise Linux Server release 7.7.
Here is my installation setting followed the "Symbiflow Installation Guide and Tutorial."
1. >chmod 755 ./Symbiflow-Linux-7-3_05_15_2020.gz.run
2. >export SYM_INSTALL_PATH=/home/username/Tool/
3. >./Symbiflow-Linux-7-3_05_15_2020.gz.run
4. >cd /home/username/Tool/symbiflow-arch-defs/install/bin
5. >source ql_env
6. >cd /home/username/Work
7. >ql_symbiflow -h
---
[username@machinename Work]$ ql_symbiflow -h
Below are the supported commands:
To synthesize and dump a eblif file:
>ql_symbiflow -synth -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To run synthesis, pack, place and route, generate bitstream:
>ql_symbiflow -compile -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To generate the jlink file:
>ql_symbiflow -jlink -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To generate the post verilog file:
>ql_symbiflow -post_verilog -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file >
To generate the ascii header file from bitstream:
>ql_symbiflow -bit2header -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file>
To generate the ascii header file from jlink:
>ql_symbiflow -jlink2header -src <source_dir path> -d <device> -k <package> -t <top> -v <verilog_list file> -p <pcf file >
Device supported:ql-eos-s3
Packages supported PD64,PU64,WR42
-h
/home/username/Tool/symbiflow-arch-defs/install/bin/ql_symbiflow: line 224: /v_list: Permission denied
---
Is this correct? or need any correction on installation?
thanks for your advise!!