Open Source Simulator

Post Reply
bobbobber
Posts: 5
Joined: Fri May 15, 2020 8:31 am
Location: London

Reading the Symbiflow Installation guide you mention Mentor Graphics QuestaSim.

Will QuickLogic support any of the open source simulators Icarus Verilog or Cascade?

Or do you recommend any other free simulators for pre / post-layout simulation that your tools support?
gmartin
Posts: 17
Joined: Thu May 14, 2020 2:50 am

QuestaSim is the tested simulator, but any Verilog simulator should work.
mithro
Posts: 6
Joined: Fri Jun 05, 2020 10:20 pm

I just wanted to confirm that the SymbiFlow project already uses both Verilator (https://www.veripool.org/wiki/verilator) and Icarus Verilog (http://iverilog.icarus.com/) heavily and these tools should be documented as working once more verification has been done.
Post Reply