Minimum RGB Display Requirements

Post Reply
bobbobber
Posts: 5
Joined: Fri May 15, 2020 8:31 am
Location: London

I have a NXP processor that has an MIPI Tx output and I need to use an RGB display.

I am looking at your family of MIPI to RGB bridges Bx5BxA? and I wanted to understand if there are any restrictions with the RGB display requirements?
Robert
Posts: 5
Joined: Fri May 15, 2020 8:27 am

The RGB Display needs to support DataEnable (DE) Mode and not VSYNC/HSYNC sync mode.
If the Pixel Clock for the display is less than 12.5MHz then the SYS_CLK input needs to match the required Pixel CLK.

The Bx5B2A supports resolutions up to 1366 x 768 @ 24 bpp @ 60 fps
The Bx5B3A supports resolutions up to 1920 x 1200 @ 24 bpp @ 60 fps
Post Reply