Hi,
We are working on an interlock circuit where we'd like to use a FPGA in combination with a MCU to in a switching circuit. The basic requirement is that both switches can't be on at the same time, so the FPGA will enforce the timing such that switch X has to be off for z amount of time before switch Y can be turned on. Some things that seem nice to have:
- instant on would be nice, but not sure if absolutely required
- enough logic to implement a few counters and some simple logic
- be re-programmable in-system so we can change the operation if needed
Can you recommend quicklogic parts we should look at?
Thanks!
Interlock FPGA choice
Hi,
The EOS S3 has the ARM M4 MCU + 892 Logic cells of eFPGA that should allow you to build the logic that you require.
you can find more details about the S3 at https://www.quicklogic.com/products/soc ... ontroller/
Cheers,
Mao
The EOS S3 has the ARM M4 MCU + 892 Logic cells of eFPGA that should allow you to build the logic that you require.
you can find more details about the S3 at https://www.quicklogic.com/products/soc ... ontroller/
Cheers,
Mao